PT Texture White, Gray & Sandstone
Description : A high strength polymer modified grout mix designed for replicating stone textures over existing concrete and masonry surfaces. Texture is chemically designed to address the many challenges of replicating natural stone textures. Note: Because of the progressive formulation of this product, it will mechanically bond to virtually any surface, hence eliminating the need for a "special counter-top blend".
Mix : Texture should be mixed with Acrylic Resin and water.
Variations in temperature, humidity and altitude will dictate the amount of water used. Consistency can be adjusted depending on the texture desired. Dispersion pigments can be added to achieve the desired color.
PT 1 To 1 Acrylic Resin
Description : A polymer resin to increase cohesion and strengthen concrete/ masonry products.
Use : To be mixed with Texture and or used to prevent gassing from existing concrete.
Thermoplastic Sealer
Description : A crystal clear, non-yellowing, premium quality thermoplastic sealer used to seal cured concrete surfaces. Thermoplastic Sealer is UV resistant and is perfectly suited for decorative concrete overlayment, stamped concrete, exposed aggregate, or any other surface where penetration and wear resistance is important.
Accent Powders
Description : A pigmented polymer modified cementatious coloring system formulated to achieve authentic replications of natural colors seen in rock and stone while maintaining the abrasion resistance required in heavy traffic areas.
Dispersion Pigment
Description : A highly concentrated, alkali free, liquid dispersion pigmentation system formulated specifically to integrally color concrete coatings. Dispersion pigments are available in a myriad of standard colors. (Custom colors available)
Tapes
Description : A unique process for replicating stone, tile and slate with previously unavailable authenticity while still maintaining low labor and high profit potential. They are available in multiple sizes.
Pure-Stain
Description : Available in either water or acid based formulations, Pure-stain is a penetrating liquid that reacts with concrete or masonry surfaces to produce weathered, variegated and antiqued finishes in a variety of colors.
PT Crack Control
A two part, cross-link urethane that when combined with sand forms a tough instant polymer that repairs cracks in concrete in 20 minutes.
Back to Top
| 
